=========== Addon deviations ===========
*WARNING:* Deviations found between the requested AddOn's and the AddOn's
calculated by the AddOn Queue Calculation.
Addon |Old Release|New Release|Description
=============================================================================
ST-A/PI| | |Not taken into account by the Addon Queue
| | |Calculator, will be processed in phase
| | |IS_SELECT automatically or SUM will ask for a
| | |decision.
-----------------------------------------------------------------------------
Extracting 28 package(s) ...
(This may take some time)
Extracting 32 package(s) ...
(This may take some time)
<< 2014/07/03 15:54:02 END OF PHASE PREP_EXTENSION/EHP_INCLUSION
>> 2014/07/03 15:54:02 START OF PHASE PREP_EXTENSION/COMPINFO_EHP
<< 2014/07/03 15:54:02 END OF PHASE PREP_EXTENSION/COMPINFO_EHP
>> 2014/07/03 15:54:02 START OF PHASE PREP_EXTENSION/IS_TABDMP_INC
<< 2014/07/03 15:54:02 END OF PHASE PREP_EXTENSION/IS_TABDMP_INC
>> 2014/07/03 15:54:02 START OF PHASE PREP_EXTENSION/NAVERS2_HANDLE_INIT
<< 2014/07/03 15:54:02 END OF PHASE PREP_EXTENSION/NAVERS2_HANDLE_INIT
>> 2014/07/03 15:54:02 START OF PHASE PREP_EXTENSION/NCVERS2_HANDLE_INIT
<< 2014/07/03 15:54:02 END OF PHASE PREP_EXTENSION/NCVERS2_HANDLE_INIT
>> 2014/07/03 15:54:02 START OF PHASE PREP_EXTENSION/NAVERS2_DELSAINT_C_W
<< 2014/07/03 15:54:02 END OF PHASE PREP_EXTENSION/NAVERS2_DELSAINT_C_W
>> 2014/07/03 15:54:02 START OF PHASE PREP_EXTENSION/NAVERS2_DELSAINT_E_W
<< 2014/07/03 15:54:02 END OF PHASE PREP_EXTENSION/NAVERS2_DELSAINT_E_W
>> 2014/07/03 15:54:02 START OF PHASE PREP_EXTENSION/IS_SELECT
=========== Add-On Selection ===========
Select the add-ons for which you want to change the decision about the target
release.
You cannot continue unless you have made a decision about the target release
for all add-ons.
|Selected |Add-On ID |Source Release |Target Release |Status |Note |
----+----------+-----------+----------------+----------------+----------------------+--------+
1|X |ST-PI |2008_1_700 |2008_1_710 |INST/UPG WITH STD CD |539977 |
2|X |ST-A/PI |01Q_700 |? |UNDECIDED |69455 |
=========== Decision About Add-On ST-PI ===========
NOTE: The decision of the enhancement package inclusion is: INST/UPG WITH STD
CD
01) - Upgrade the add-on with SAINT package.
02) - Upgrade the add-on with CD/DVD.
03) * Upgrade the add-on to version delivered with upgrade DVDs.
Select the operation to be performed: Upgrade the add-on to version delivered with upgrade DVDs.
=========== Decision About Add-On ST-A/PI ===========
01) - Upgrade the add-on with SAINT package.
02) * Upgrade the add-on with CD/DVD.
03) - Keep the add-on with the current version. Use only if supported by the add-on vendor! A vendor key is required.
04) - Delete the add-on with SAINT package actively.
05) - Delete the add-on passively. Use only if supported by the add-on vendor!
Select the operation to be performed: Upgrade the add-on with CD/DVD.
=========== Enter DVD Mount Points ===========
Enter mount points for the DVDs required for the procedure.
Enter at least the mount point containing Upgrade ADD-On
The requested data carrier is not mounted on any of the mount points you
entered.
|Path |Description |
----+------------------------------+-------------+
1|E:\usr\sap\MBT\7.3\ST\EPS\in | |
2| | |
3| | |
4| | |
5| | |
01) Dispose old mount points and rebuild scope
Enter a number/range/"all" to change selection or "ok" to end:
=========== Enter DVD Mount Points ===========
Enter mount points for the DVDs required for the procedure.
Enter at least the mount point containing Upgrade ADD-On
The requested data carrier is not mounted on any of the mount points you
entered.
|Path |Description |
----+------------------------------+-------------+
1|E:\usr\sap\MBT\7.3\ST\EPS\in | |
2| | |
3| | |
4| | |
01) Dispose old mount points and rebuild scope
Enter a number/range/"all" to change selection or "ok" to end:
=========== Enter DVD Mount Points ===========
Enter mount points for the DVDs required for the procedure.
Enter at least the mount point containing Upgrade ADD-On
The requested data carrier is not mounted on any of the mount points you
entered.
|Path |Description |
----+----------------------------------------+-------------+
1|E:\usr\sap\MBT\7.3\ST\EPS\in\CSR01200314| |
2|E:\usr\sap\MBT\7.3\ST\EPS\in\CSR01200314| |
3| | |
4| | |
01) Dispose old mount points and rebuild scope
Enter a number/range/"all" to change selection or "ok" to end:
=========== Enter DVD Mount Points ===========
Enter mount points for the DVDs required for the procedure.
Enter at least the mount point containing Upgrade ADD-On
|Path |Description |
----+----------------------------------+-------------+
1|E:\usr\CSR0120031469_0076955.PAT | |
2|E:\usr\CSR0120031469_0081130.PAT | |
3| | |
4| | |
5| | |
6| | |
01) Dispose old mount points and rebuild scope
Enter a number/range/"all" to change selection or "ok" to end:
=========== Enter DVD Mount Points ===========
Enter mount points for the DVDs required for the procedure.
Enter at least the mount point containing Upgrade ADD-On
|Path |Description |
----+----------------------------------+-------------+
1|E:\usr\CSR0120031469_0076955.PAT | |
2|E:\usr\CSR0120031469_0081130.PAT | |
3| | |
4| | |
5| | |
6| | |
01) Dispose old mount points and rebuild scope
Enter a number/range/"all" to change selection or "ok" to end:
=========== Repeat Phase ===========
RESTART: Stopped in phase PREP_EXTENSION/IS_SELECT
01) - Repeat phase PREP_EXTENSION/IS_SELECT to continue at the point it stopped
02) * Repeat the module from the beginning
03) - Exit program
: Repeat the module from the beginning
-- Finished execution of 35/63 phases.
Execution of unit "Configuration" failed!
=========== Action PREP_EXTENSION/SELSTACKXML_READ, Type info: Stack Configuration Overview ===========
According to the selected stack configuration file, the following target state
will be chosen: *Note:* The target state below only shows components that
differ from the target state in the export.
Component|Release |SPLevel
============================
BI_CONT |737 |0008
----------------------------
PI_BASIS |730 |0011
----------------------------
SAP_ABA |730 |0011
----------------------------
SAP_BASIS|730 |0011
----------------------------
SAP_BW |730 |0011
----------------------------
ST-PI |2008_1_710|0009
----------------------------
>> Current module status: selected PREP_EXTENSION, PREP_INTEGRATION, PREP_INSTALL
>> Waiting for request handler...
>> Received 'next' action for unit 'CONFIGURE'.
Execution of PREPARE module "Extension module" begins at 20140703165921
>> 2014/07/03 16:59:21 START OF PHASE PREP_EXTENSION/NCVERS_READ
<< 2014/07/03 16:59:21 END OF PHASE PREP_EXTENSION/NCVERS_READ
>> 2014/07/03 16:59:21 START OF PHASE PREP_EXTENSION/UPLOAD_FIRST
Uploading data ...
<< 2014/07/03 16:59:23 END OF PHASE PREP_EXTENSION/UPLOAD_FIRST
>> 2014/07/03 16:59:23 START OF PHASE PREP_EXTENSION/COMPINFO_EXP
<< 2014/07/03 16:59:23 END OF PHASE PREP_EXTENSION/COMPINFO_EXP
>> 2014/07/03 16:59:23 START OF PHASE PREP_EXTENSION/UPLOAD_REQUEST
=========== Add-On Request ===========
If you want to include add-on upgrade packages or Support Packages into the
procedure, you can now provide the required CDs and packages.
All relevant CDs and packages are then selected by default.
01) * Continue without adding CDs
02) - Add (further) add-on or Support Package CDs
: Continue without adding CDs
Uploading data ...
<< 2014/07/03 16:59:29 END OF PHASE PREP_EXTENSION/UPLOAD_REQUEST
>> 2014/07/03 16:59:29 START OF PHASE PREP_EXTENSION/SELSTACKXML_READ
=========== Stack Configuration Overview ===========
According to the selected stack configuration file, the following target state
will be chosen:
*Note:* The target state below only shows components that differ from the
target state in the export.
Component|Release |SPLevel
============================
BI_CONT |737 |0008
----------------------------
PI_BASIS |730 |0011
----------------------------
SAP_ABA |730 |0011
----------------------------
SAP_BASIS|730 |0011
----------------------------
SAP_BW |730 |0011
----------------------------
ST-PI |2008_1_710|0009
----------------------------
<< 2014/07/03 16:59:29 END OF PHASE PREP_EXTENSION/SELSTACKXML_READ
>> 2014/07/03 16:59:29 START OF PHASE PREP_EXTENSION/IS_MV_CHK1
<< 2014/07/03 16:59:29 END OF PHASE PREP_EXTENSION/IS_MV_CHK1
>> 2014/07/03 16:59:29 START OF PHASE PREP_EXTENSION/NAVERS_READ
<< 2014/07/03 16:59:29 END OF PHASE PREP_EXTENSION/NAVERS_READ
>> 2014/07/03 16:59:29 START OF PHASE PREP_EXTENSION/IS_INIT
<< 2014/07/03 16:59:30 END OF PHASE PREP_EXTENSION/IS_INIT
>> 2014/07/03 16:59:30 START OF PHASE PREP_EXTENSION/IS_INST_LIST
<< 2014/07/03 16:59:30 END OF PHASE PREP_EXTENSION/IS_INST_LIST
>> 2014/07/03 16:59:30 START OF PHASE PREP_EXTENSION/ADDON_TRBK
<< 2014/07/03 16:59:30 END OF PHASE PREP_EXTENSION/ADDON_TRBK
>> 2014/07/03 16:59:30 START OF PHASE PREP_EXTENSION/IS_MOVEMENT
<< 2014/07/03 16:59:30 END OF PHASE PREP_EXTENSION/IS_MOVEMENT
>> 2014/07/03 16:59:30 START OF PHASE PREP_EXTENSION/COMPINFO_ISMV
<< 2014/07/03 16:59:30 END OF PHASE PREP_EXTENSION/COMPINFO_ISMV
>> 2014/07/03 16:59:30 START OF PHASE PREP_EXTENSION/SFW_MOVEMENT
<< 2014/07/03 16:59:30 END OF PHASE PREP_EXTENSION/SFW_MOVEMENT
>> 2014/07/03 16:59:30 START OF PHASE PREP_EXTENSION/COMPINFO_SFWMV
<< 2014/07/03 16:59:31 END OF PHASE PREP_EXTENSION/COMPINFO_SFWMV
>> 2014/07/03 16:59:31 START OF PHASE PREP_EXTENSION/RUN_RSUPGSFW
Starting of SFW: Determine active BF(S) according to installed Addons in batch (job RSUPGSFW)
<< 2014/07/03 16:59:41 END OF PHASE PREP_EXTENSION/RUN_RSUPGSFW
>> 2014/07/03 16:59:41 START OF PHASE PREP_EXTENSION/IS_TABDMP_EHP
<< 2014/07/03 16:59:41 END OF PHASE PREP_EXTENSION/IS_TABDMP_EHP
>> 2014/07/03 16:59:41 START OF PHASE PREP_EXTENSION/SCANDIR_EPS
Scanning directory 'E:/usr/sap/MBT/7.3' - this may take a while...
Extracting archive 'E:/usr/sap/MBT/7.3\KITAB8K.SAR' to '\\SAPBITEST\sapmnt\trans\EPS\in'.
Extracting archive 'E:/usr/sap/MBT/7.3\KITAB8L.SAR' to '\\SAPBITEST\sapmnt\trans\EPS\in'.
<< 2014/07/03 16:59:51 END OF PHASE PREP_EXTENSION/SCANDIR_EPS
>> 2014/07/03 16:59:51 START OF PHASE PREP_EXTENSION/EHP_INCLUSION
Uploading data ...
=========== Addon deviations ===========
*WARNING:* Deviations found between the requested AddOn's and the AddOn's
calculated by the AddOn Queue Calculation.
Addon |Old Release|New Release|Description
=============================================================================
ST-A/PI| | |Not taken into account by the Addon Queue
| | |Calculator, will be processed in phase
| | |IS_SELECT automatically or SUM will ask for a
| | |decision.
-----------------------------------------------------------------------------
<< 2014/07/03 16:59:57 END OF PHASE PREP_EXTENSION/EHP_INCLUSION
>> 2014/07/03 16:59:57 START OF PHASE PREP_EXTENSION/COMPINFO_EHP
<< 2014/07/03 16:59:57 END OF PHASE PREP_EXTENSION/COMPINFO_EHP
>> 2014/07/03 16:59:57 START OF PHASE PREP_EXTENSION/IS_TABDMP_INC
<< 2014/07/03 16:59:57 END OF PHASE PREP_EXTENSION/IS_TABDMP_INC
>> 2014/07/03 16:59:57 START OF PHASE PREP_EXTENSION/NAVERS2_HANDLE_INIT
<< 2014/07/03 16:59:57 END OF PHASE PREP_EXTENSION/NAVERS2_HANDLE_INIT
>> 2014/07/03 16:59:57 START OF PHASE PREP_EXTENSION/NCVERS2_HANDLE_INIT
<< 2014/07/03 16:59:57 END OF PHASE PREP_EXTENSION/NCVERS2_HANDLE_INIT
>> 2014/07/03 16:59:57 START OF PHASE PREP_EXTENSION/NAVERS2_DELSAINT_C_W
<< 2014/07/03 16:59:58 END OF PHASE PREP_EXTENSION/NAVERS2_DELSAINT_C_W
>> 2014/07/03 16:59:58 START OF PHASE PREP_EXTENSION/NAVERS2_DELSAINT_E_W
<< 2014/07/03 16:59:58 END OF PHASE PREP_EXTENSION/NAVERS2_DELSAINT_E_W
>> 2014/07/03 16:59:58 START OF PHASE PREP_EXTENSION/IS_SELECT
=========== Add-On Selection ===========
Select the add-ons for which you want to change the decision about the target
release.
You cannot continue unless you have made a decision about the target release
for all add-ons.
|Selected |Add-On ID |Source Release |Target Release |Status |Note |
----+----------+-----------+----------------+----------------+----------------------+--------+
1|X |ST-PI |2008_1_700 |2008_1_710 |INST/UPG WITH STD CD |539977 |
2|X |ST-A/PI |01Q_700 |? |UNDECIDED |69455 |
=========== Decision About Add-On ST-PI ===========
NOTE: The decision of the enhancement package inclusion is: INST/UPG WITH STD
CD
01) * Upgrade the add-on with SAINT package.
02) - Upgrade the add-on with CD/DVD.
03) - Upgrade the add-on to version delivered with upgrade DVDs.
Select the operation to be performed: Upgrade the add-on with SAINT package.
=========== Add-On Request ===========
The program has not found a matching SAINT package for 'ST-PI'.
01) - Back to selection
02) * Scan EPS inbox and upload new packages
03) - Add (further) add-on or Support Package CDs
: Scan EPS inbox and upload new packages
Uploading data ...
=========== Add-On Request ===========
The program has not found a matching SAINT package for 'ST-PI'.
01) - Back to selection
02) * Scan EPS inbox and upload new packages
03) - Add (further) add-on or Support Package CDs
: Scan EPS inbox and upload new packages
Uploading data ...
=========== Add-On Request ===========
The program has not found a matching SAINT package for 'ST-PI'.
01) - Back to selection
02) * Scan EPS inbox and upload new packages
03) - Add (further) add-on or Support Package CDs
: Scan EPS inbox and upload new packages
Uploading data ...
=========== Add-On Request ===========
The program has not found a matching SAINT package for 'ST-PI'.
01) - Back to selection
02) * Scan EPS inbox and upload new packages
03) - Add (further) add-on or Support Package CDs
: Scan EPS inbox and upload new packages
Uploading data ...
=========== Add-On Request ===========
